Carpet cleaning method-This step is the most important step in the carpet cleaning method process. We test for colour fastness and colour bleed on patterned carpets. We test to ascertain what fibres are used to make the carpet. All of these factors combine to determine the best method for cleaning a carpet and the correct chemicals to get the very best results possible.
Dry Soil Removal
We thoroughly vacuum the carpet. This removes dry soilage from the carpet. Vacuuming extracts dust and grit to prevent turning dust into muddy residue when we begin cleaning with our machines. In addition to removing much of the dirt, this process lifts many of the fibers to allow access to the base of the construction in the following steps.
We move on to treat the entire carpet with the appropriate cleaning agent for that carpet type. For this we use a specially formulated traffic lane cleaner to dissolve greasy soils on well used areas and high soilage areas. The pre-spray is left to dwell on the carpet fibres to break down soilage and dirt.
We use a special designated carpet brush to work the pre-spray into carpet fibres and to aid break down of soilage. We work the solution from 4 different directions to further lift the carpet pile.
Hot water Extraction Cleaning
Now we use our powerful machine to remove the soilage we have broken down in the above steps and to remove the cleaning solutions we have used. This dislodges any remaining soil from the base of the construction while killing any germs that reside on the fibres. We add a fresh smelling odoriser to our cleaning machine to leave your carpets smelling as fresh as it is clean! The machines we employ use twin vacuum motors to remove the vast majority of water and ensure minimal drying times of only a few hours. Only a very small amount of moisture is left on the surface of the fibre to ensure an enduring cleanliness of your carpet.
After the main hot water extraction cleaning we treat remaining stains and spots with specialized professional stain and spot removers.
Carpet Stain guard Protection (optional) for additional fee
After the carpet has been cleaned and the surface of the fiber prepared, we can move on to apply stain protector. This barrier can last up to 5 years and coats each fiber to inhibit soiling and staining. It allows our clients to simply mop up spillages as it prevents the fiber absorbing oil and water based stains.